Treefrog by MorenaP printed @ 50 micron z-resolution

DSC_7245_bearb DSC_7249

We were stoked when we saw the treefrog of MorenaP on for the first time. Our first attempts to print with 50 microns z-resolution where basically made with single perimeter vases (check out our gallery) .

The treefrog is a perfect object for first attempts with multiple perimeters and 50 microns layer height. The first print came out quite well. Nevertheless we tried to increase the print speed for perimeters up to 60mm/s when we realized that additional cooling is required. Therefor the new batch of printers will be equipped with a bigger fan (60mm).